Cycling builds the bacteria that convert ammonia to nitrate. Mix salt water, add a source of ammonia, test, and wait until ammonia and nitrite read zero.
Quick answer: To cycle a saltwater tank, mix salt water to about 1.025 specific gravity, add live rock and a source of ammonia, then test every few days. The tank is cycled when ammonia and nitrite read 0 and nitrate is present, usually after 3 to 6 weeks. Only then add the first hardy fish.
Key takeaways
Cycling grows beneficial bacteria that remove ammonia and nitrite.
Use a reliable ammonia, nitrite and nitrate test kit.
Live rock speeds up the process.
Be patient: adding livestock early is the most common cause of losses.
Step by step
Set up the tank, filter, heater and flow.
Mix marine salt with dechlorinated or RO water to about 1.025 and check with a refractometer.
Add live rock and sand.
Add an ammonia source (a small piece of raw prawn or pure ammonia) to reach about 2 ppm.
Test ammonia, nitrite and nitrate every 2 to 3 days.
When ammonia and nitrite both drop to 0 within 24 hours of dosing, the cycle is complete.
Do a water change to reduce nitrate, then add one or two hardy fish.
How long does a saltwater cycle take?
Typically 3 to 6 weeks. Warm water in Singapore may speed it up. Adding bottled bacteria can help, but you still need to test.