
CO2 for Planted Tanks: Beginner Setup and Bubble Rate
, by Fishlist Team, 1 min reading time

, by Fishlist Team, 1 min reading time
A CO2 system needs a cylinder, regulator, bubble counter, tubing and diffuser. Start with a low bubble rate and watch fish and plants.
Quick answer: A pressurised CO2 system for a planted tank has a cylinder, regulator with solenoid, bubble counter, tubing, check valve and diffuser. Start at about 1 bubble per second for a 60 litre tank, run it only while lights are on, and watch fish for gasping before increasing.
| Part | Job |
|---|---|
| Cylinder | Stores CO2 |
| Regulator and solenoid | Controls pressure and timer shut-off |
| Bubble counter | Shows the rate |
| Check valve | Prevents back-flow |
| Diffuser | Dissolves CO2 into water |
| Drop checker | Shows the approximate CO2 level |
Shop CO2 systems, diffusers and CO2 checkers.
Begin at about 1 bubble per second in a 60 litre tank, then adjust by 1 bubble every day or two while watching fish behaviour. Larger tanks need more. Exact needs vary with flow and plants.
Not for easy plants. Read Easy Aquarium Plants That Don't Need CO2 first. If you do use CO2, also check lighting hours.
Yes, at correct levels. Too much can cause gasping or death, so increase slowly.
No, plants do not use it without light and oxygen drops.
It helps beginners judge CO2 levels.
Last updated: November 2026.